Defect Engineering and Anisotropic Modulation of Ionic Transport in Perovskite Solid Electrolyte LixLa(1−x)/3NbO3

Solid electrolytes, such as perovskite Li_3xLa_2/1−xTiO₃, Li_xLa_(1−x)/3NbO₃ and garnet Li₇La₃Zr₂O₁₂ ceramic oxides, have attracted extensive attention in lithium-ion battery research due to their good chemical stability and the improvability of their ionic conductivity with great potential in solid electrolyte battery applications. These solid oxides eliminate safety issues and cycling instability, which are common challenges in the current commercial lithium-ion batteries based on organic liquid electrolytes. However, in practical applications, structural disorders such as point defects and grain boundaries play a dominating role in the ionic transport of these solid electrolytes, where defect engineering to tailor or improve the ionic conductive property is still seldom reported. Here, we demonstrate a defect engineering approach to alter the ionic conductive channels in Li_xLa_(1−x)/3NbO₃ (x = 0.1~0.13) electrolytes based on the rearrangements of La sites through a quenching process. The changes in the occupancy and interstitial defects of La ions lead to anisotropic modulation of ionic conductivity with the increase in quenching temperatures. Our trial in this work on the defect engineering of quenched electrolytes will offer opportunities to optimize ionic conductivity and benefit the solid electrolyte battery applications.     

The role of induced current density in Steroelectronic effects: Perlin effect

The normal and reverse Perlin effect is usually explained by the redistribution of electron density produced by hyperconjugative mechanisms, which increases the electron population within axial or equatorial proton in normal or reverse effect, respectively. Here an alternative explanation for the Perlin effect is presented on the basis of the topology of the induced current density, which directly determines the nuclear magnetic shielding. Current densities around the C? H bond critical point and intra‐atomic and interatomic contributions to the magnetic shielding explain the observed Perlin effect. The balance between intra‐atomic and interatomic contributions determines the difference in the total atomic shielding. Normal Perlin effect is dominated by intra‐atomic part, whereas reverse effect is dominated by interatomic contribution. © 2015 Wiley Periodicals, Inc.     

阳极结构调整对稀土电解槽的影响

以目前使用的6 k A稀土电解槽为研究对象,采用实验验证与数值模拟计算相结合的方式对采用不同阳极结构的稀土电解槽进行了全面分析讨论。使用斜角切割阳极片可以在维持电解槽槽电压、氧化物利用率、产品合格率等技术指标不变的情况下,克服传统正交切割阳极片在使用过程中随着阳极片反应消耗造成电流效率降低及缩短石墨坩埚使用寿命的现象。其可作为稀土电解槽工艺改造的一个发展方向。     

微波水热两步法合成高可见光响应Ag2S/ZnO及其光催化性能、机理

在不同的制备条件下,通过微波水热两步法获得了一系列Ag₂S/ZnO光催化剂,采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见漫反射吸收光谱(UV-Vis/DRS)、扫描电子显微镜(SEM)和N₂吸附-脱附等测试手段对产物结构和形貌进行了表征。结果表明,产物以六方纤锌矿ZnO为主,其晶型结构并未随着反应温度和Ag₂S物质的量的增加而改变。Ag₂S的引入显著增强了光催化剂在可见光区的吸收,使吸收边带发生红移,同时抑制了ZnO(001)晶面的生长。另外,所得产物的形貌随着Ag₂S物质的量的增加从爆米花状转变为少量的柱体颗粒,且BET比表面积经过复合后明显减小。以罗丹明B为目标降解物,研究并比较了一系列Ag₂S/ZnO光催化剂对罗丹明B的光降解性能。结果表明,n_Ag2S/n_ZnO=1:10时,光催化剂在紫外光、可见光和模拟日光的照射下具有最好的光催化效果,优于目前应用最广泛的市售P25。另外,所制备的光催化材料Ag₂S/ZnO经4次循环使用后,其降解效率没有明显下降,表明该催化材料具有一定的光催化稳定性。经捕获实验研究发现,在Ag₂S/ZnO的光催化反应中空穴起主要作用,并根据绝对电负性估算了复合材料Ag₂S/ZnO的能带位置,据此提出了可能的光催化反应机理。     

Modulating ion current rectification generating high energy output in a single glass conical nanopore channel by concentration gradient

Inspired by biological systems that have the inherent skill to generate considerable bioelectricity from the salt content in fluids with highly selective ion channels and pumps on cell membranes,herein,a fully abiotic,single glass conical nanopores energy-harvesting is demonstrated.Ion current rectification(ICR)in negatively charged glass conical nanopores is shown to be controlled by the electrolyte concentration gradient depending on the direction of ion diffusion.The degree of ICR is enhanced with the increasing forward concentration difference.An unusual rectification inversion is observed when the concentration gradient is reversely applied.The maximum power output with the individual nanopore approaches10~4pW.This facile and cost-efficient energy-harvesting system has the potential to power tiny biomedical devices or construct future clean-energy recovery plants.     

裂解-气相/质谱法分析木屑物证

木屑是一种在各种案件现场中出现几率较高的微量物证,但由于其化学组成复杂、难溶,高分子组分之间的差异不显著,所以一直未建立有效的鉴定方法.采用裂解-气相/质谱技术(PY-GC/MS)对不同树种木屑难溶物进行分析,结果发现:不同树种木屑难溶物的总离子流图特征相似,即每种木屑难溶物的总离子流图中都有一组特征峰.但个别组分有差异.     

用样条法研究高速滑行体的运动

研究高速滑行体在规则波浪中滑行时，得到了二阶常微分方程组，本文应用样条插值求积方法和三次样条配点计算，求解滑行体在不同波浪条件下的纵倾和升沉的响应．实例计算结果与实验值比较一致．     

三维随机分析的响应曲面法

本文采用“响应曲面法”设计了三维随机分析程序，可对多种材料组成的三维结构进行破坏概率计算，并在Ｗｉｎｄｏｗｓ下实现了计算结果的可视化。     

线性时滞系统的离散最优控制

介绍了对线性时滞系统进行最优控制的设计，将具有时滞控制的线性系统离散后引入增广状态向量。获得不显含时滞的差分方程，根据时滞量的两种分类情况采用连续和离散形式的性能指标函数导出了最优控制律。控制律包含当前状态和此前若干步状态向量的叠加，最优控制律直接从时滞方程中得到，可保证系统的稳定性，此方法亦适用于大时滞的情况。数值算例验证了控制策略的有效性。     

层合球面各向同性热释电空心球的瞬态响应

运用叠加原理，将层合球面各向同性热释电空心球的球对称动力学问题的解分成准静态和动 态两部分，准静态部分首先运用状态空间法给出了显式表达式，然后运用分离变量法、初参 数法和特征函数展开技术，给出了动态部分的表示式，再结合内外表面上的电学边界条件和 界面上的电学连续条件，导出一个关于时间函数的第二类Volterra积分方程，运用插值法 可成功地给出此积分方程的高精度数值解，最终可求得原问题的位移、应力、电位移以及电 势的响应. 此方法适用任意层数且各层是任意厚度的层合热释电空心球作用随时间以任意形 式变化的球对称温度场. 文中还给出了数值结果.